Air Accidents Investigation Branch
Image: Showing bellcrank and disconnected pivot joint after recovery to the hangar, view looking towards top of fuselage, cockpit is to the left.
The pilot was conducting a test flight as part of the process of regaining G-BTOOs permit to fly following an extensive rebuild. As the pilot was flying straight and level at 140mph, he became aware the elevator was no longer connected to the control column. The pilot was able to maintain control, but during the final stages of approach, the aircraft pitched nose down and landed heavily on the forward fuselage it came to rest inverted. The pilot received a severe laceration to his head and was taken to hospital.
The investigation found that a pivot joint at the end of an elevator pushrod had become disconnected, probably due to the lack of split pin to prevent the securing bolts castle nut from loosening. Although not directly linked to this accident, discrepancies were found regarding adherence to LAA guidance for recording work. In addition, it was noted that the extent to which the 51% rule for amateur built aircraft needs to be applied in relation to overhaul, repair and restoration was not clear in regulatory material.
As a result of these findings, the Civil Aviation Authority (CAA) and the Light Aircraft Association (LAA) have both stated they will be taking two Safety Actions each to address these issues.
Media enquiries call: 01932 440