GovWire

Guidance: How to do the SFI actions for buffer strips

Rural Payments Agency

August 10
12:06 2023

Its up to you how you complete each SFI action, as long as you do it in a way that can reasonably be expected to achieve the actions aim (which is described in each action).

This voluntary guidance includes advice on how you could establish and maintain a 4m to 12m grass buffer on arable and horticultural land (AHL4) and improved grassland (IGL3).

You may find it helpful to read this guidance, but you do not have to follow it. The requirements you must follow for each SFI action are explained in the Details of the SFI actions, which you can find in either:

How to establish and maintain a 4 metre (m) to 12m grass buffer strips (AHL4 and IGL3)

What youre aiming to achieve

The aim for AHL4 and IGL3 is that theres a grass buffer strip with an intact grass sward throughout the year, without tracks, compacted areas or poaching.

Establishing grass buffer strips

You can choose to establish the grass buffer strip by sowing seeds or allowing natural regeneration, unless it will buffer:

  • historic or archaeological features

  • water bodies

Where to locate the grass buffer strip

AHL4 and IGL3 explain:

  • that youre required to locate a 4m to 12m wide grass strip so it buffers an existing landscape feature - the strip can be wider than 12m, but youll only be paid for the 12m width
  • what types of landscape features to buffer

To help you decide where to locate the grass buffer strip, you may find it helpful to do SAM1 (assess soil, produce a soil management plan and test soil organic matter).

Sowing a seed mix to establish the grass buffer strip

Sowing a seed mix will establish the grass buffer more quickly, which will reduce the risk of soil erosion.

To prevent damage by soil erosion, youll need to sow a seed mix if the grass strip will buffer historic or archaeological features or water bodies.

You can choose a seed mix that contains native grass species. Grass species you could use include: timothy, cocksfoot, crested dogs tail, red fescue, smooth-stalked meadow grass.

It will help the seeds to germinate if theyre sown into a seedbed thats:

  • firm, consolidated, fine, level and weed free
  • moist, which will usually be the case in the autumn you can sow in the spring, but you may need to increase the sowing rate, depending on weather and soil type

You can broadcast the seeds onto the surface of the seedbed to help germination. Alternatively, you can shallow-drill the seeds up to a depth of 1 centimetre (cm), as small seeds usually struggle to germinate when sown deeper than 1cm.

If the soil is dry enough, rolling after youve sown the seeds can improve seed-to-soil contact, retain moisture and reduce the risk of slug damage.

Your seed supplier can:

  • help you choose a seed mix thats the best match for your land and local conditions
  • advise you on an overall sowing rate for the seed mix you choose

Establishing grass buffer strips through natural regeneration

Using natural regeneration means the grasses in the buffer strip are local to your area. It will take longer to establish the buffer strip, but it will cost less.

To encourage the seeds that are already in the soil to germinate, you can cultivate the soil between spring and late summer.

Maintaining established grass buffer strips

Once the grass buffer strip is established, AHL4 and IGL3 require you to maintain the grass buffer strip by managing it in a way that can reasonably be expected to achieve the relevant actions aim (described above).

Cutting AHL4 grass buffer strips

For AHL4, its up to you how much of the buffer strips width to cut along as much of the strip as possible next to the edge of the cropped area.

Cutting up to half of the strips width from the crop edge each year will create a varied grass height and structure.

This will help to provide:

  • short grass for birds to forage in, such as grey partridge chicks
  • mid-length grass for species like brown hares
  • shelter and nesting places for birds and invertebrates in long, rarely cut, tussocky grass

You can only cut the buffer strip in late summer, as explained in AHL4. This is to avoid disturbing breeding birds or damage nests, as birds, nests and eggs are protected by law.

Remove the cut vegetation, where possible, to help reduce the risk of it smothering the flower species and limit weeds. If its impractical to do this, you can finely chop them to spread them as thinly as possible.

Cutting or grazing IGL3 grass buffer strips

For IGL3, you can cut (unless its for hay or silage) or graze the grass buffer strip with livestock, as long as the actions requirements are met.

Staggering cutting or grazing, so all the buffer strips are not cut or grazed at the same time, will usually mean theres always habitat available for invertebrates and small mammals.

Controlling weeds

You may need to control weeds when they appear. To control weeds like docks, nettles, thistles and common ragwort, you can cut the affected area, as long as theres still an intact grass sward.

AHL4 and IGL3 also allow you to use herbicides to weed wipe or spot treat weeds.

Published 10 August 2023

Related Articles

Comments

  1. We don't have any comments for this article yet. Why not join in and start a discussion.

Write a Comment

Your name:
Your email:
Comments:

Post my comment

Recent Comments

Follow Us on Twitter

Share This


Enjoyed this? Why not share it with others if you've found it useful by using one of the tools below: